GR8DVR
BUTTONS REMAPPED
BETTER AUDIO**still crappy
50/60FPS
8 COLOR FX PRESETS
Your Mini DVR is about to get a boost - free custom firmware + media toolkit!
Turn the cheap 3-button mini FPV DVR into a proper MiniDV capture box: true 50i/60i fields, the finest quality, 9 colour looks on the buttons, and a Windows & Mac app that builds your personal firmware and converts every clip to MP4.

FREEWARE
✓ Unlocked - thank you!
Free · Windows 10 / 11 and macOS 11+. Which Mac? Apple menu → About This Mac: "Chip: Apple M…" = Apple Silicon, "Processor: Intel" = Intel.
GR8DVR is new and not code-signed yet. Windows: "unrecognised app" → More info → Run anyway.
Mac: unzip, drag GR8DVR to Applications, then right-click → Open the first time (macOS 15+: System Settings → Privacy & Security → Open Anyway).
Source code: GitHub.
Mini DVR Firmware Builder
Pick the look and frame rate your DVR starts with, and GR8DVR builds your firmware and writes it to the card. Try first runs it once from memory - nothing permanent until you choose Install.
Mini DVR Import
Finds the card by itself, skips clips you already imported, weaves both fields into smooth 50p (or cinematic 25p) and applies the looks you picked while filming - even if you switched mid-recording.
Media Converter
AVCHD (.MTS), DV, AVI, MOV, MKV, VOB… to MP4, H.265, ProRes, GIF or MP3. Preview, turn left / right, smart file names by recording date, one dated folder per import.
1-4 work like classic grading LUTs - real blacks, soft film contrast, split-toning, teal & orange. 5-7 are false-colour maps inspired by Python's matplotlib colour ramps (Inferno, Viridis, Turbo). 8 imitates infrared film, turning foliage pink-red.
The DVR records clean video and stamps the look number into every frame; the look is applied when you import, so you can always get the untouched original back.
- Download and open GR8DVR (Windows .exe or Mac app). No installer - it just runs. First launch: Windows → More info → Run anyway; Mac → right-click → Open.
- Put the DVR's microSD card in your computer and open the Mini DVR Firmware Builder tab.
- Choose your start-up look and frame rate (60 fps smooth + no look is the default), pick the card, choose Try first and click Write to card.
- Put the card in the DVR and switch it on. GR8DVR runs from memory. Buttons: MENU record · ▶ next look (the LED blinks its number) · ◀ 60 / 30 fps.
- Record a test clip, then import it on the Mini DVR Import tab and check the result.
- Happy? Install permanently: run the builder again and choose Install. Charge the battery fully and keep USB power connected, never switch off while the red LED blinks (30-60 s), wait 10 s after it stops, then switch off and delete CRESFW.BIN from the card.
Changed your mind? Restore in the same tab flashes the original Eachine firmware back.
Which DVR does this work with?
The small 3-button FPV "mini DVR" (about 53 × 33 × 9 mm, 400 mAh, MENU ◀ ▶ buttons, MJPEG AVI files), sold as Eachine ProDVR / HMDVR and many unbranded clones with the same board. The builder only writes firmware for the exact firmware it was made for and checks every byte.
Can I brick my DVR?
"Try first" runs GR8DVR from memory only - switch off and you are back to normal. A permanent install flashes the chip; a power cut during those 30-60 seconds can only be fixed with an SPI programmer. Keep the battery charged and USB power connected. Use at your own risk.
Will it wear out my DVR?
No. Nothing is overclocked - the DVR already receives all 50/60 half-pictures and the stock firmware just throws half away. It may run a little warmer and the battery lasts a bit less, that's it. The firmware chip is only written when you Install or Restore.
Which microSD card should I use?
A High Endurance card (the dashcam kind), U3 / V30. GR8DVR writes about 40 Mbit/s (~18 GB per hour) - a bit more than MiniDV tape (~13 GB/h), less than a phone filming 4K. The card is the only part that wears faster, and it's cheap to replace.
How long does the battery last?
Roughly an hour on the built-in 400 mAh battery, a bit less at full quality. For a full 60-minute tape, run it from a USB-C power bank.
Why isn't it like this from the factory?
It was made for FPV drone pilots: long recording on cheap, slow cards, small files and long battery life matter more to them than every half-picture and the finest detail. The hardware could always do it - GR8DVR just tunes it for tapes.
What camcorders can I record?
Anything with an analog AV / composite output: MiniDV (it was made for a Sony DCR-PC101E), Hi8, VHS camcorders, old game consoles… PAL and NTSC.
60 fps smooth vs 30 fps cinematic?
Camcorders send 50 (PAL) or 60 (NTSC) half-pictures a second. Smooth mode turns each into a full frame - motion looks exactly like on the camcorder. Cinematic mode combines them into 25/30 calmer, film-like frames. Switch any time with ◀.
Does it work on Mac or Linux?
Yes on Mac: there are builds for Apple Silicon (M1-M4) and Intel Macs, macOS 11 or newer. Linux users can run the source code from GitHub with Python and ffmpeg.
Windows or macOS won't open it.
GR8DVR is new and not code-signed yet. Windows SmartScreen shows "unrecognised app": click More info → Run anyway. On a Mac, right-click the app → Open the first time; on macOS 15+ go to System Settings → Privacy & Security and click Open Anyway. Some antivirus tools flag any app packed with PyInstaller; the full source is public on GitHub.
Already subscribed to the Buzco newsletter?
Just enter the same email again - the download unlocks right away and you won't be subscribed twice.
Is it really free?
Yes. If it made your tapes look GR8, a donation (pay what you want) or a piece from the Buzco store keeps projects like this coming.
Credits. Eachine - original ProDVR firmware (included unmodified, all rights theirs). eonflux7 / open-minidvr-50i (MIT) - the firmware research GR8DVR builds on. FFmpeg (GPL), NumPy (BSD), Python / Tk (PSF). Design, artwork and sounds: Buzco / GR8 Success.
Freeware - use at your own risk. GR8DVR is provided "as is", without warranty of any kind. Modifying device firmware may void your warranty and can permanently damage your device; to the maximum extent permitted by law, Buzco is not liable for any damage, data loss or other harm.
Manufacturer firmware. To keep installation simple, GR8DVR includes an unmodified copy of Eachine's original ProDVR firmware, used only to apply GR8DVR's patches on your computer and to restore the original. All rights belong to Eachine / the manufacturer; no ownership is claimed and it is not sold. Rights holders: contact us and it will be removed from future downloads. GR8DVR is not affiliated with, endorsed or sponsored by Eachine, Sony or any device maker; all trademarks belong to their owners.
Your videos never leave your computer - GR8DVR has no telemetry and works offline.
Enjoying free stuff? Keep it coming.
GR8DVR is free and always will be. If you'd like to support it, chip in what you want - or grab a piece from the Buzco store.